First-timer's Guide to Installing a New Shower Unit

Estimate

We've unearthed this great article on How to Install a Shower Enclosure directly below on the net and believe it made sense to write about it with you on my blog.

A successful shower installation requires cautious preparation and also a great deal of work. In many cases, you will certainly need to do 3 types of tasks: mounting walls, mounting the plumbing, and finishing wall surfaces.

Prep work

To start with, you should choose the sort of shower that you wish to mount. It is necessary to ascertain whether the selected shower can handling specific systems as well as can control a safe level of water through the central heating boiler. The majority of shower devices nowadays are developed to be flexible to various water stress (such as stored warm water and also cold keys).
It is also vital to take into account the water stress and also the preparation of the piping as well as drainage for the shower

Various Kinds Of Shower Units

Push-on Mixer: The tube and spray parts of the push-on mixer shower unit can be connected to the bathroom tap according to your requirement, and also the water temperature can be changed by means of the taps. Push-on mixers are cheap and also exceptionally basic to set up. However, although the hose link is easy, it is conveniently dislodged. Furthermore, it is inconvenient to adjust the temperature.

Bath/Shower Mixer: The hose pipe and spray of this sort of shower are combined with a bathroom mixer faucet, and also the temperature level can be changed via the bath faucets. It is a very inexpensive alternative and no additional plumbing is involved. Nevertheless, the bath/shower mixers additionally suffer from inconvenient temperature level control alternatives.

Handbook Mixer: The tube as well as spray of a hands-on mixer shower device belong of the wall unit as well as the hot and cold water products are linked to a single valve The temperature and pressure of the water are controlled through either one or a selection of handles (in extra pricey showers). Although temperature level control is much easier in manual mixer kinds, they are extra pricey than the formerly discussed mixers. They also require extra plumbing of hot and cold water supply pipelines.

Thermostatic Mixer: The hose and also spray of this shower type belong of the wall system and also the hot and cold water supplies are linked to a solitary valve right here as well. It is complete with a built-in stabiliser to self-adjust the water temperature as well as to prevent it from ending up being too warm. One of the biggest benefits of a thermostatic mixer shower kind consists of hassle-free temperature level control. Nevertheless, it is one of the most costly of the different mixer options.

Power Shower: A power shower is a single device consisting of an effective electric pump that is capable of altering both the water pressure and temperature level. This sort of shower can be fitted if there is water system from a cold water tank as well as a hot water cylinder. A power shower makes the change of both stress as well as temperature level simple. On the other hand, it is unsuitable for water heated straight by the shower or where the water is provided by a combination central heating boiler under mains stress.

Electric Shower: An electric shower is plumbed right into a keys cold water supply and also it heats up the water electrically. It is important to note that for this shower kind to be installed, the mains pressure needs to be at the very least 0.7 kg/sq centimeters (10lb/sq in). The unit enables the temperature level and pressure to be adjusted by means of a knob. Versions with temperature level stabilisers are better as they stay untouched by other taps in other places being used within the household. A significant drawback of electrical showers is that the control knob just enables the option of heats at less pressure, or lower temperature levels at a higher pressure. This is problematic in the winter season when the spray is commonly weak as well as the mains water is cooler. Nevertheless, this problem is taken on in some versions which are readily available with a winter/summer setting.

Approach

Depending upon the kind of shower you desire to set up, the shower head have to either be fitted in order to avoid its contact with the water in the bathroom listed below or the base tray, or it needs to have a check shutoff.
Prior to beginning, it is recommended to mark the placements of the shower head and control, and to intend the pipe-work involved. In addition, the drainage system to eliminate the drainage will require to be intended. Both placements of the cable television course as well as the shower switch will certainly additionally require to be considered if a rapid or electrical shower system is being mounted.
Make use of the direction overview given with the shower device to fit the shower control.Before fitting the pipes that will provide the water to the shower system, it is essential to remove the water supply. In order to protect the pipes, they ought to be offered a waterproof covering and also fitted with isolating shutoffs. The pipelines can after that be hidden into the wall surface as well as plastered over to neaten the overall appearance.
Fit the base tray, shower head, as well as installations.
Connect the main shower control to the pipes that will be providing the water (This might need a female screw string adapter).
Reconnect the water system and examination the pipes for any kind of leaks, as some might require tightening.
If you are installing an electric shower, keep in mind to switch off the electricity supply prior to making any kind of electrical links. Once these connections have actually been made (there ought to be advice within the instruction manual), the power supply can be changed back on.

Readjusting Water Stress to Fit Your Shower

The cold water reservoir can be lifted to a higher elevation (in some cases just 150mm (6inches)) by fitting a strong wood assistance beneath it - potentially composed of struts as well as blockboards. If you pick this alternative, the main and distribution pipes will certainly likewise need to be increased to satisfy the new height of the tank.
Additionally, a booster pump (a single pump or a dual/twin pump) can be fitted. Whichever type is selected, it needs to be linked into the power supply in order to run.

Piping and also Drain

It is best to use 15mm size supply pipelines, as well as make the runs to the shower as short and also straight as possible so as to keep optimal pressure and also minimise warmth loss. In addition, by reducing the use of joints for pipe edges, you can reduce the resistance in the circulation of the water. You can achieve this by flexing the pipelines rather.

Many Usual Errors

Breaking or disregarding neighborhood code restrictions.

Making use of pipes that are as well little.

Connecting copper to galvanized without making use of a brass or dielectric fitting between both.

Not utilizing tape or pipeline compound at threaded joints.

Not leveling your fixtures when mounting them.

Not installing an air gap filling up for fixtures.

Cutting supply stub outs too brief to set up the shutoff valves onto after the ended up wall surface remains in place.

Not appropriately lining up tubing into fittings or stop valves. (Forcing the nut onto the compression ring at an angle when the tubing goes to an angle will certainly create a leakage.).

When transforming the water back on in your house, always run the outside hose pipe valve or flush your bathrooms to bleed dust and also air from the lines. This particles can cause problems in your sink taps and also other plumbing trim.

Most Popular Shower Enclosure Options to Upgrade Your Bathroom

Frameless Shower Enclosures

Switching to a frameless shower enclosure can instantly add a modern feel to your bathroom. This type of shower enclosure eliminates the visual obstruction of frames, providing a seamless flow using fully customisable glass.

Since they are fully customisable, it fits all sizes and shapes of your bathroom space. You can also design it in a way suitable for an expansive spa shower.

In-line Shower Options

Another popular shower enclosure option you can use to upgrade your bathroom is an in-line shower. This type of shower installs a shower glass in-line with an adjacent wall, keeping water within the shower area.

You can have two options for in-line showers: hinged doors and sliding doors. An in-line shower with hinged doors allows you to have one glass shower door mounted on one side and open the door outwards. Meanwhile, in-line showers with sliding doors will enable you to save space but are more expensive.

Semi-Frameless Shower Enclosures

The semi-frameless shower enclosure is also an excellent shower enclosure option as it reduces the possibility of mould. Since the glass door is frameless, there’s no way soap and water will be stuck on it. But to ensure that there’s no way for mould to flourish in your bathroom, choose frameless shower enclosures instead.

Semi-frameless shower enclosures are the ideal choice if you adore the design of frameless showers but would prefer a more affordable solution. These types of shower enclosures have a range of options available by the glass manufacturing process in accordance with various height specifications.

You can also customise this type of shower enclosure. However, your options might be limited because of the standard sizes and heights.

Glass Block Shower Enclosure

If you don’t want a bathroom door and walk-in glass shower enclosures are not an option either, a glass block shower enclosure is for you. Glass blocks will allow your bathroom to access maximum daylight while having the privacy it offers. Also, glass block enclosures might require a bit more effort to clean than other enclosures, but they are durable and versatile options.

You can also be creative when using glass blocks for your bathroom. Since this type of shower enclosure is made of small glass blocks, you can easily create a unique shower enclosure shape. There are many options for thickness, styles, and colours, too.

Final Thoughts

Upgrading your bathroom with a new shower enclosure is a great way to add value to your home. Not only will it appear nice, but it will also be more functional and efficient. When choosing a shower enclosure, pick one that fits the style of your bathroom and your budget. It’s also paramount to take note of the pros and cons of each type before installation to ensure you don’t miss anything important.

https://gharpedia.com/blog/shower-enclosure-to-upgrade-bathroom/

As a keen reader on How to Build a Shower Enclosure for Your DIY Bathroom, I think sharing that information was really useful. Enjoyed reading our piece of writing? Please share it. Let other people check it out. We enjoy reading our article about How to Install a Direct-to-Stud Shower Enclosure.

Click Here